for the kitchen
improving
your dishwasher's drying
Good drying
results depend on several factors.
Some items are difficult to dry even when all recommendations are
followed. For example, cups and glasses with concave bottoms will
hold water at the end of the cycle. And plastic and Teflon* items
have a porous surface which tends to hold water droplets. So,
towel drying of these items may be necessary.
You can improve drying results by following these tips:
Use Rinse Aid
A rinse aid such as Finish Rinse Aid greatly
improves drying results and prevents water spotting. These
non-toxic products help water slide off the dishes more easily.
For dishwashers with an automatic rinse aid dispenser (located in
the door), use a liquid rinse aid. For models without a dispenser,
hang a rinse aid basket or disc in the back right corner of the
lower rack.
Use Heat Dry When heat is added to the dry portion of the cycle,
the heating element operates intermittently to greatly improve
drying results. The difference in energy use between heat dry and
air dry equals about $5 per year based on washing six loads per
week.
Use Hot Water
Hot water is essential to achieving proper drying results. The
water heater should be set at 140 degrees F. if water heating
options on your dishwasher are not available or not selected. If
water heating options are used, the water heater may be set to
deliver a minimum of 120 degrees F water to the dishwasher. To
check the water temperature, first place a thermometer in a glass.
Next, position this glass under the faucet in the sink nearest the
dishwasher and run hot water into the glass. Once the temperature
stabilizes, read the temperature from the thermometer.
To ensure the dishwasher is filling with the hottest water
possible, do the following:
-
Before
starting the dishwasher, let the faucet at the nearest sink
run until the water is hot.
-
Avoid
running the dishwasher while hot water is being used for other
activities like showers or laundry.
Use the
Proper Amount of Dishwashing Detergent
Dishwasher detergents contain ingredients that improve the
sheeting action of the water and aid in drying performance. The
amount of detergent depends on the water hardness and degree of
food soil. A general recommendation is to use one teaspoon of
detergent for each grain of water hardness, with a minimum of
three teaspoons. When using a concentrated detergent, decrease
this amount by half.
Load Properly
-
Face
soiled surfaces to the centre.
-
Keep
large items from shielding small items.
-
Load only
one item between each set of tines.
-
Avoid
placing glasses over tines. This interferes with cleaning and
drying results.
-
Place
silverware in the basket with some handles up and some down.
-
Check the
User's Guide for more loading recommendations.
*Brand names
are trademarks of the respective manufacturers.
For more
tips about using your dishwasher, please click
here
|